Check and compare the size and shape of your mouse feet with with one of FeetGlide. Make sure is it identical.
Remove the old mouse feet. Remove any remaining adhesive on the surface.
Degrease the surface with the supplied wipe. Then dry the surface.
Carefully remove the protective layer from the adhesive side. Do not touch the adhesive surface.
Place the new mouse feet sequentially to the right place. Press the mouse on a flat surface for about 30 seconds.
Done! Enjoy superb glide of your mouse.
If I haven’t found any skates for my mouse model?
There is a huge assortment of gaming mice on the market now. Some of them don’t find a large number of consumers, while others are sold in millions of copies. We closely follow the development of the market and the updating of the model lines of the leading manufacturers. Nevertheless, it’s very difficult to keep up with everything. If you haven’t found any glides for your mouse in our catalog – don’t be discouraged. Just write us a request for feedback. We’ll definitely consider your request and, most likely, we’ll expand our assortment with the mouse feet you need.
Will the lift-off distance of the mouse be violated when changing glides?
The thickness of the FeetGlide is designed separately for each mouse model. In most cases it’s slightly larger than the factory feet with which the mice are originally sold. But this difference is in tenths of a millimeter and will not affect the lift-off distance of the mouse. But this has a positive effect on increasing the resource of the skates.
In addition, most actual gaming mice have an adjustable lift-off distance.
Is there some kind of film on the working side of the glides?
Not. there is no transparent film on the working side of the mouse feet. Only the back, adhesive side of the glides is covered with a paper layer.
Is it possible to glue glides incorrectly and what to do about it?
When installing the glides, you may miss the mark and not ideally fall into the contour of the corresponding groove. No problem. If you immediately pay attention to this, then you can immediately correct the situation. The glue used on the back of the skates takes some time to fix. And if you immediately correct the position of the glide to the correct one, then no problems will arise.
Why are the glides in white only?
The color of the legs is determined by the natural color of the PTFE (polytetrafluoroethylene) material from which it is made. We use only 100% pure PTFE material in production, as it has the lowest coefficient of friction, and therefore the best sliding. Any additives, including paint, impair these properties.
How long do FeetGlide mouse feet wear out?
Teflon mouse feet are consumable items. When used it gradually wears off, such are the properties of the material. We cannot answer how quickly the glides will be erased in your case, since it depends on a number of points: the type of surface used, the individual characteristics of using the mouse, the intensity of use.
In any case you’ll always find two sets of glides inside the FeetGlide package.
Steph Uys (verified owner) –
Really happy with these, makes such a big difference for such a low price.
At the time of purchase this was also the only place I could find aftermarket skates specifically for the Gretxa.