Description
Perfect glide
Pure polished PTFE material gives your gaming mouse an unrivaled level of glide.
Precision and control
The use of Teflon feet provides full control over the movement of the mouse on the working surface. Both with sweeping movements and with minimal mouse movement. It is now easier to achieve maximum cursor precision.
Finished edge
All skates are finished on the outer edge. The absence of sharp corners ensures smooth mouse movement and reduces the necessary lapping time at the beginning of use.
High quality materials
Only 100% pure PTFE material is used in the production of glides. As well as specially selected glue, which ensures reliable fixation of glides, and no residue removal.
High resource
The thickness of the material is selected individually for each mouse model in such a way as to provide the maximum resource of use, without violating the usual lift-off distance of the sensor.
Spare skates for Asus TUF M4 Air mouse – for smooth glide
The M4 Air is a 47g gaming mouse in a rugged design. The printed circuit board of the manipulator is treated with a water-repellent coating according to the IPX6 standard, therefore it is resistant to damage from accidentally spilled liquid. The case is protected from bacteria by a special layer containing positively charged ions. Lightweight and flexible, the Paracord cable creates a minimum of friction, allowing the accessory to move freely. The Asus TUF M4 Air’s Teflon glides provide fast and smooth movements on the mat and table.
The manipulator is equipped with a high-precision optical sensor with a resolution of 16,000 DPI. The maximum acceleration is 40G. There are 6 buttons on the case, for which you can configure various game actions. The DPI switch button allows you to change the sensitivity on the fly. Armoury Crate software is used to conveniently configure everything from key programming to creating profiles for programs.
Replacing worn mouse feet for improved handling
Serious gaming loads cause the Asus TUF M4 Air skates to become thinner over time. Because of this, the accessory moves with interference and noticeably slower. It becomes more difficult to manage such a gadget, which affects the performance of the game. To regain the accuracy of control over the device, it is necessary to replace the hyperglides. This process takes only a couple of minutes and does not require special skills.
Replaceable mouse feet are made of pure polytetrafluoroethylene. This material is selected for its low coefficient of friction, which results in a flawless glide. Glides for TUF M4 Air have a thickness of 0.60 mm, which ensures that the height of the sensor separation from the working surface is maintained. The reverse side of the pads is covered with an adhesive layer that ensures their secure fixation in the mounting grooves.
The FeetGlide online store will help you order Teflon feet for the Asus TUF M4 Air mouse at an attractive price. In the set you will find two sets of skates and wipes containing alcohol.
Instruction
Check and compare the size and shape of your mouse feet with with one of FeetGlide. Make sure is it identical.
Remove the old mouse feet. Remove any remaining adhesive on the surface.
Degrease the surface with the supplied wipe. Then dry the surface.
Carefully remove the elements from the backing paper. Do not touch the adhesive layer.
Place the new mouse feet sequentially to the right place. Press the mouse on a flat surface for about 30 seconds.
Done! Enjoy superb glide of your mouse.
FAQ
If I haven’t found any skates for my mouse model?
There is a huge assortment of gaming mice on the market now. Some of them don’t find a large number of consumers, while others are sold in millions of copies. We closely follow the development of the market and the updating of the model lines of the leading manufacturers. Nevertheless, it’s very difficult to keep up with everything. If you haven’t found any glides for your mouse in our catalog – don’t be discouraged. Just write us a request for feedback. We’ll definitely consider your request and, most likely, we’ll expand our assortment with the mouse feet you need.
Will the lift-off distance of the mouse be violated when changing glides?
The thickness of the FeetGlide is designed separately for each mouse model. In most cases it’s slightly larger than the factory feet with which the mice are originally sold. But this difference is in tenths of a millimeter and will not affect the lift-off distance of the mouse. But this has a positive effect on increasing the resource of the skates.
In addition, most actual gaming mice have an adjustable lift-off distance.
Is there some kind of film on the working side of the glides?
Not. there is no transparent film on the working side of the mouse feet. Only the back, adhesive side of the glides is covered with a paper layer.
Is it possible to glue glides incorrectly and what to do about it?
When installing the glides, you may miss the mark and not ideally fall into the contour of the corresponding groove. No problem. If you immediately pay attention to this, then you can immediately correct the situation. The glue used on the back of the skates takes some time to fix. And if you immediately correct the position of the glide to the correct one, then no problems will arise.
Why are the glides in white only?
The color of the legs is determined by the natural color of the PTFE (polytetrafluoroethylene) material from which it is made. We use only 100% pure PTFE material in production, as it has the lowest coefficient of friction, and therefore the best sliding. Any additives, including paint, impair these properties.
How long do FeetGlide mouse feet wear out?
Teflon mouse feet are consumable items. When used it gradually wears off, such are the properties of the material. We cannot answer how quickly the glides will be erased in your case, since it depends on a number of points: the type of surface used, the individual characteristics of using the mouse, the intensity of use.
In any case you’ll always find two sets of glides inside the FeetGlide package.
Reviews
There are no reviews yet.