Description
Perfect glide
Pure polished PTFE material gives your gaming mouse an unrivaled level of glide.
Precision and control
The use of Teflon feet provides full control over the movement of the mouse on the working surface. Both with sweeping movements and with minimal mouse movement. It is now easier to achieve maximum cursor precision.
Finished edge
All skates are finished on the outer edge. The absence of sharp corners ensures smooth mouse movement and reduces the necessary lapping time at the beginning of use.
High quality materials
Only 100% pure PTFE material is used in the production of glides. As well as specially selected glue, which ensures reliable fixation of glides, and no residue removal.
High resource
The thickness of the material is selected individually for each mouse model in such a way as to provide the maximum resource of use, without violating the usual lift-off distance of the sensor.
Replacement mouse feet for Ajazz AJ139 V2 MC: a quick upgrade
The Ajazz AJ139 V2 MC mouse combines an advanced gaming sensor with a lightweight, ergonomic body. Smooth movement across surfaces is ensured by the skates of the Ajazz AJ139 V2 MC. However, over time the original mouse feet wear out: micro-abrasions appear and friction increases, which leads to reduced tracking accuracy. Replacing the hyperglides restores smooth glide and consistent control.
Wear-resistant material and flawless shape
Glides for the Ajazz AJ139 V2 MC mouse are made from 100% pure PTFE (Teflon), providing ultra-smooth glide without jerks. The surface is carefully polished to minimize resistance on any mouse pad. A thickness of 0.75 mm maintains the factory sensor lift-off distance and ensures precise sensor response. The shape of the replacement glides for the AJ139 V2 MC fully matches the contours of the mouse base, making hyperglide replacement simple and accurate.
Installation in just a few minutes
Before applying the glides to the Ajazz AJ139 V2 MC, carefully remove the old pads and clean the mouse base from adhesive residue using an alcohol wipe. Then peel off the protective film from the new skates and place them into the designated slots. To securely fix the pads, press the mouse against a flat surface and wait for 30 seconds.
In the FeetGlide online store, you can order PTFE mouse feet for the Ajazz AJ139 V2 MC with worldwide delivery available. We offer attractive prices and convenient payment options.
Instruction
Check and compare the size and shape of your mouse feet with with one of FeetGlide. Make sure is it identical.
Remove the old mouse feet. Remove any remaining adhesive on the surface.
Degrease the surface with the supplied wipe. Then dry the surface.
Carefully remove the elements from the backing paper. Do not touch the adhesive layer.
Place the new mouse feet sequentially to the right place. Press the mouse on a flat surface for about 30 seconds.
Done! Enjoy superb glide of your mouse.
FAQ
If I haven’t found any skates for my mouse model?
There is a huge assortment of gaming mice on the market now. Some of them don’t find a large number of consumers, while others are sold in millions of copies. We closely follow the development of the market and the updating of the model lines of the leading manufacturers. Nevertheless, it’s very difficult to keep up with everything. If you haven’t found any glides for your mouse in our catalog – don’t be discouraged. Just write us a request for feedback. We’ll definitely consider your request and, most likely, we’ll expand our assortment with the mouse feet you need.
Will the lift-off distance of the mouse be violated when changing glides?
The thickness of the FeetGlide is designed separately for each mouse model. In most cases it’s slightly larger than the factory feet with which the mice are originally sold. But this difference is in tenths of a millimeter and will not affect the lift-off distance of the mouse. But this has a positive effect on increasing the resource of the skates.
In addition, most actual gaming mice have an adjustable lift-off distance.
Is there some kind of film on the working side of the glides?
Not. there is no transparent film on the working side of the mouse feet. Only the back, adhesive side of the glides is covered with a paper layer.
Is it possible to glue glides incorrectly and what to do about it?
When installing the glides, you may miss the mark and not ideally fall into the contour of the corresponding groove. No problem. If you immediately pay attention to this, then you can immediately correct the situation. The glue used on the back of the skates takes some time to fix. And if you immediately correct the position of the glide to the correct one, then no problems will arise.
Why are the glides in white only?
The color of the legs is determined by the natural color of the PTFE (polytetrafluoroethylene) material from which it is made. We use only 100% pure PTFE material in production, as it has the lowest coefficient of friction, and therefore the best sliding. Any additives, including paint, impair these properties.
How long do FeetGlide mouse feet wear out?
Teflon mouse feet are consumable items. When used it gradually wears off, such are the properties of the material. We cannot answer how quickly the glides will be erased in your case, since it depends on a number of points: the type of surface used, the individual characteristics of using the mouse, the intensity of use.
In any case you’ll always find two sets of glides inside the FeetGlide package.
Reviews
There are no reviews yet.