Description
Perfect glide
Pure polished PTFE material gives your gaming mouse an unrivaled level of glide.
Precision and control
The use of Teflon feet provides full control over the movement of the mouse on the working surface. Both with sweeping movements and with minimal mouse movement. It is now easier to achieve maximum cursor precision.
Finished edge
All skates are finished on the outer edge. The absence of sharp corners ensures smooth mouse movement and reduces the necessary lapping time at the beginning of use.
High quality materials
Only 100% pure PTFE material is used in the production of glides. As well as specially selected glue, which ensures reliable fixation of glides, and no residue removal.
High resource
The thickness of the material is selected individually for each mouse model in such a way as to provide the maximum resource of use, without violating the usual lift-off distance of the sensor.
Glorious Model O 2 Wireless mouse feet: more maneuverability
The Glorious Model O 2 Wireless is an ambidextrous mouse designed for right-handed use. With a weight of 68 grams, the model is comfortable to use during long gaming sessions. The matte finish is pleasant to the touch and perfectly resists dirt. The body is perforated over the entire surface. Glorious Model O 2 Wireless skates are located in the corners, which ensures smooth movement of the manipulator on the table and mat.
The device uses an advanced optical sensor with a customizable resolution of 100–26,000 DPI. The maximum polling frequency is 1000 Hz, acceleration is 5G. The model has six programmable buttons for easy control.
When does it become necessary to replace the Glorious Model O 2 Wireless feet?
Skates need to be replaced in two cases: if they are worn out or damaged. In such situations, the Glorious Model O 2 Wireless glides lose their original smoothness, which leads to:
- decreased cursor accuracy;
- slow sensor response;
- difficult mouse movement.
Durable and wear-resistant hyperglides in FeetGlide
In the catalog you can find skatez made of polytetrafluoroethylene, which has a low coefficient of friction. The material is used in its pure form and goes through a grinding stage. Thanks to this, the hyperglides for the Glorious Model O 2 Wireless move easily and smoothly on different types of surfaces. The manipulator with new pads gains ideal controllability: both with light cursor movements and with sweeping movements.
The thickness of the skates is specially selected to meet two requirements: maintaining the usual sensor separation height and increasing the service life. FeetGlide offers 0.85mm Teflon feet for the Glorious Model O 2 Wireless mouse. Delivery of orders is carried out worldwide. The online store supplies the pass in duplicate and complete with alcohol-containing wipes. To replace you need to follow simple instructions.
Instruction
Check and compare the size and shape of your mouse feet with with one of FeetGlide. Make sure is it identical.
Remove the old mouse feet. Remove any remaining adhesive on the surface.
Degrease the surface with the supplied wipe. Then dry the surface.
Carefully remove the elements from the backing paper. Do not touch the adhesive layer.
Place the new mouse feet sequentially to the right place. Press the mouse on a flat surface for about 30 seconds.
Done! Enjoy superb glide of your mouse.
FAQ
If I haven’t found any skates for my mouse model?
There is a huge assortment of gaming mice on the market now. Some of them don’t find a large number of consumers, while others are sold in millions of copies. We closely follow the development of the market and the updating of the model lines of the leading manufacturers. Nevertheless, it’s very difficult to keep up with everything. If you haven’t found any glides for your mouse in our catalog – don’t be discouraged. Just write us a request for feedback. We’ll definitely consider your request and, most likely, we’ll expand our assortment with the mouse feet you need.
Will the lift-off distance of the mouse be violated when changing glides?
The thickness of the FeetGlide is designed separately for each mouse model. In most cases it’s slightly larger than the factory feet with which the mice are originally sold. But this difference is in tenths of a millimeter and will not affect the lift-off distance of the mouse. But this has a positive effect on increasing the resource of the skates.
In addition, most actual gaming mice have an adjustable lift-off distance.
Is there some kind of film on the working side of the glides?
Not. there is no transparent film on the working side of the mouse feet. Only the back, adhesive side of the glides is covered with a paper layer.
Is it possible to glue glides incorrectly and what to do about it?
When installing the glides, you may miss the mark and not ideally fall into the contour of the corresponding groove. No problem. If you immediately pay attention to this, then you can immediately correct the situation. The glue used on the back of the skates takes some time to fix. And if you immediately correct the position of the glide to the correct one, then no problems will arise.
Why are the glides in white only?
The color of the legs is determined by the natural color of the PTFE (polytetrafluoroethylene) material from which it is made. We use only 100% pure PTFE material in production, as it has the lowest coefficient of friction, and therefore the best sliding. Any additives, including paint, impair these properties.
How long do FeetGlide mouse feet wear out?
Teflon mouse feet are consumable items. When used it gradually wears off, such are the properties of the material. We cannot answer how quickly the glides will be erased in your case, since it depends on a number of points: the type of surface used, the individual characteristics of using the mouse, the intensity of use.
In any case you’ll always find two sets of glides inside the FeetGlide package.
Reviews
There are no reviews yet.