Description
Perfect glide
Pure polished PTFE material gives your gaming mouse an unrivaled level of glide.
Precision and control
The use of Teflon feet provides full control over the movement of the mouse on the working surface. Both with sweeping movements and with minimal mouse movement. It is now easier to achieve maximum cursor precision.
Finished edge
All skates are finished on the outer edge. The absence of sharp corners ensures smooth mouse movement and reduces the necessary lapping time at the beginning of use.
High quality materials
Only 100% pure PTFE material is used in the production of glides. As well as specially selected glue, which ensures reliable fixation of glides, and no residue removal.
High resource
The thickness of the material is selected individually for each mouse model in such a way as to provide the maximum resource of use, without violating the usual lift-off distance of the sensor.
Replacement Mouse Feet for Logitech G500/G500s: Enhanced Capabilities
The Logitech G500 and G500s gaming mice feature an ergonomic design that ensures comfortable control and consistent efficiency. Programmable buttons allow for customization of game commands. Microswitches are rated for up to 20 million clicks. The Logitech G500 glides, made from PTFE, enable the accessory to smoothly slide across all surfaces, including fabric.
Due to significant wear, the hyperglides tend to wear out. When they thin out, maneuverability and precision in controlling the device worsen. Replacing the pads can restore the device to its original characteristics. The need to purchase new glides also arises if the body of the device has been opened for repair. The fasteners are located under the hyperglides, so to disassemble the structure, they must be removed. Reapplying the Logitech G500 skates evenly is practically impossible.
Reliable Replacement Mouse Feet
The online store FeetGlide offers hyperglides made of polytetrafluoroethylene. This material has a low friction coefficient, ensuring ideal sliding without the need for additional ingredients. To enhance the natural characteristics of PTFE, it is additionally polished. The products also undergo special treatment around the edges to eliminate sharp angles and minimize the break-in time for new glides for the Logitech G500 mouse.
The skates are made up to 1 mm thick. This parameter is chosen to maintain the lift height of the optical sensor from the work surface. As a result, the device instantly responds to commands and accurately tracks gaming actions. The replacement glides for the Logitech G500s are identical in shape and size to the original, ensuring easy installation in the mounting slots.
FeetGlide offers hyperglides at attractive prices and with worldwide delivery. Several convenient payment methods are available. The delivery package includes alcohol wipes, which are used to remove glue residues. Replacing the Teflon mouse feet for the Logitech G500s takes just a few minutes.
Instruction
Check and compare the size and shape of your mouse feet with with one of FeetGlide. Make sure is it identical.
Remove the old mouse feet. Remove any remaining adhesive on the surface.
Degrease the surface with the supplied wipe. Then dry the surface.
Carefully remove the elements from the backing paper. Do not touch the adhesive layer.
Place the new mouse feet sequentially to the right place. Press the mouse on a flat surface for about 30 seconds.
Done! Enjoy superb glide of your mouse.
FAQ
If I haven’t found any skates for my mouse model?
There is a huge assortment of gaming mice on the market now. Some of them don’t find a large number of consumers, while others are sold in millions of copies. We closely follow the development of the market and the updating of the model lines of the leading manufacturers. Nevertheless, it’s very difficult to keep up with everything. If you haven’t found any glides for your mouse in our catalog – don’t be discouraged. Just write us a request for feedback. We’ll definitely consider your request and, most likely, we’ll expand our assortment with the mouse feet you need.
Will the lift-off distance of the mouse be violated when changing glides?
The thickness of the FeetGlide is designed separately for each mouse model. In most cases it’s slightly larger than the factory feet with which the mice are originally sold. But this difference is in tenths of a millimeter and will not affect the lift-off distance of the mouse. But this has a positive effect on increasing the resource of the skates.
In addition, most actual gaming mice have an adjustable lift-off distance.
Is there some kind of film on the working side of the glides?
Not. there is no transparent film on the working side of the mouse feet. Only the back, adhesive side of the glides is covered with a paper layer.
Is it possible to glue glides incorrectly and what to do about it?
When installing the glides, you may miss the mark and not ideally fall into the contour of the corresponding groove. No problem. If you immediately pay attention to this, then you can immediately correct the situation. The glue used on the back of the skates takes some time to fix. And if you immediately correct the position of the glide to the correct one, then no problems will arise.
Why are the glides in white only?
The color of the legs is determined by the natural color of the PTFE (polytetrafluoroethylene) material from which it is made. We use only 100% pure PTFE material in production, as it has the lowest coefficient of friction, and therefore the best sliding. Any additives, including paint, impair these properties.
How long do FeetGlide mouse feet wear out?
Teflon mouse feet are consumable items. When used it gradually wears off, such are the properties of the material. We cannot answer how quickly the glides will be erased in your case, since it depends on a number of points: the type of surface used, the individual characteristics of using the mouse, the intensity of use.
In any case you’ll always find two sets of glides inside the FeetGlide package.
Reviews
There are no reviews yet.